Metal dents on an automobile are trouble for the owner! Not only do they harm the appearance of the car but they also reduce the price involved at the time of sale. Hence, it is crucial to address such an issue and ensure that it is avoided in the first place. Proper recovery measures like removing dents help to restore the car back to its former glory. Here are a few methods popularly used to remove car dents from the steel or metal frame of your car:
SUCTION DENT PULLERS
Suction dent pullers work on the principle of push and pull. According to http://www.akronmobiledentrepair.com/dent-repair-in-akron/ the goal is to suck out the dented space by a creating a vacuum in the vicinity using rubber suction cup which is placed on the surface of the car. Handles are attached to the suction cup and alternative actions of push and pull suck the dented area out. It is however used for large dents and is less preferred because it leaves small ripples in the sheet metal.
Slide hammer is generally used for dents in heavy metal doors. The process of dent removal involves drilling holes in the damage area and using slide hammer screw attachment to pop out the dent. Alongside slide hammer other tools such as body hammer, shaping blocks and fiberglass are often used mostly to ensure smooth finish.
Minor ridges caused by pulling out the dents can be turned into polished surface using sand papers and sand blocks. These blocks mainly flatten the dented space. Sanding blocks supports holding of sand papers both wet and dry used for smoothing the dented areas. The professionals at http://www.akronmobiledentrepair.com/dent-removal-akron/ say that this is considered an invaluable tool in dent repair, and they are often used in the end to restore the dented surface back to normal.
While the aforementioned methods of dent removal are bound to succeed they require a certain level of professional expertise and are usually expensive to enforce. Cup plunger is a technique which is generally used to remove medium size dents and is cheap and easy to implement. Similar to the principle of suction dent pullers, cup plunger tries to suck the dent out of the metal sheet by repetitive push and pull.
HAIR DRYER AND AIR COMPRESSOR
The working revolves around expansion and compression of solid materials under heat and cold respectively. Hair dryer is focused around the dented area to heat the plastic metal following which it becomes flexible and susceptible to movement. Now air compressor is directed towards the heated area for cooling. After a while the plastic metal contracts and the dent eventually pops out. You can have this done at http://www.akronmobiledentrepair.com if you’re looking for a body shop in the Akron, Ohio area.
Using a pair of protective gloves rub dry ice over the dented surface until the dent comes out. Though it is a simple and cost effective remedy for dent removal it is still not as efficient as the rest. Thus, it is primarily used to repair small dents with proficiency.
Even though, dent removal is easy it must be duly noted that dents should be avoided at all cost. However, if they still tend to occur one can use any of the above listed dent removal method and ensure the prestige of the automobile remains unharmed.